The production of aluminum profiles for a wide range of products, in various sectors and for use in our extrusion lines
Aluminum Hot Log Shear (Hot Log Shear) is placed on the billet heating furnace and it is used to cut the aluminum billet which is hot from the oven to the desired length.
In order to have austenitic structure of steel, it is annealed as required. The actual temperature that will provide the austenitic conversion is high enough to cause the entire carbide to melt.
Single and double flakes applications have mechanical and electronic capabilities to provide precise traction and speed control.
Thermicing Furnace Furnaces which are taken in the extrusion line are used to process the aging of precipitation of the Profiles.
Stretching can be done at any point along the stretch line. By placing the tensioning piston on the front bottom of the jaws and not on the back of the jaws, space is saved.
Profiles painted with static powder paints have excellent durability against ultraviolet rays and sudden temperature changes as well as their decorative appearance.
To be able to produce profiles in desired dimensions and tolerances and to obtain the perfect surface, the mold design and construction of the profile is one of the first and most important stages.
The molds should be cleaned with the help of caustic and put under protection after the sandblasting section in order to prevent the production of the finished molds and to increase the work efficiency.
Thanks to the electronic stretching section of our products to ensure that you take your own measure, we are doing cuts in the requested sizes.
In order to avoid damaging our products at the time of shipment, we can make plastic foil, kraft paper and surface bandage packaging according to your special requirements.
In addition to our own vehicles, we are able to deliver our products to your door by land, sea and air via the international shipping company we have contracted in our export shipments.